Plates

Plates : Comparable specifications

Specifications	Yield strength			Tensile
	N/mm²			strength
	t<16mm	16<t<40	t>40mm	N/mm²
BRIDGES, FLOOD GATES, STORAGE TANKS, WATER TANKS, BUILDINGS, CRANE STRUCTURES
*EN 10137-2*
S460Q, QL, QL1	¹⁾ 460	^1)* 440	^1)** 400	^1)*** 550-720
S500Q, QL, QL1	¹⁾ 500	^1)* 480	^1)** 440	^1)*** 590-770
S550Q, QL, QL1	¹⁾ 550	^1)* 530	^1)** 490	^1)*** 640-820
S620Q, QL, QL1	¹⁾ 620	^1)* 580	^1)** 560	^1)*** 700-890
S690Q, QL, QL1	¹⁾ 690	^1)* 650	^1)** 630	^1)*** 760-940
S890Q, QL, QL1	¹⁾ 890	^1)* 830	-	^1)***880-1100
S960Q, QL, QL1	¹⁾ 960	-	-	^1)***980-1150
*EN 10137-3*
S500A, AL		²⁾ 500	^2)* 480	600-700
S550A, AL		²⁾ 550	^2)* 530	650-820
S620A, AL		²⁾ 620	^2)* 580	710-880
S690A, AL		²⁾ 690	^2)* 650	760-930
SPECIAL STEEL
*BS 7191*
275D	275	265	-	430-580
275E	275	265	265	430-580
275EZ	275	265	265	430-580
355D	355	345	-	490-640
355E	355	345	-	490-640
355EM	355	345	340	460-620
355EMZ	355	345	340	460-620
450EM	450	415	-	550-700
450EMZ	450	415	-	550-700
HULL STRUCTURES
*ABS*
Grade A, B, D, E	min. 235			400-550
Gr. AH32, DH32, EH32, FH32	min. 315			440-590
Gr. AH36, DH36, EH36, FH36	min. 355			490-620
Gr. AH40, DH40, EH40, FH40	min. 390			510-650
LR*
Grade A, B, D, E	min. 235			400-520
Gr. AH32, DH32, EH32, FH32	min. 315			440-590
Gr. AH36, DH36, EH36, FH36	min. 355			490-620
Gr. AH40, DH40, EH40, FH40	min. 390			510-650
PRESSURE VESSELS, GENERAL
*ASTM A285*
Grade A	min. 165			310-450
Grade B	min. 185			345-485
Grade C	min. 205			380-515
*ASTM A516*
Grade 55	min. 205			380-515
Grade 60	min. 220			415-550
Grade 65	min. 240			450-585
Grade 70	min. 260			485-620

Specifications	Yield strength			Tensile
	N/mm²			strength
	t<16mm	16<t<40	t>40mm	N/mm²
contd. PRESSURE VESSELS, GENERAL
*EN 10028-2*
P235GH	235	225	³⁾ 215	³⁾ 360-480
P265GH	265	255	³⁾ 245	³⁾ 410-530
P295GH	295	290	³⁾ 285	³⁾ 460-580
P355GH	355	345	³⁾ 335	³⁾ 510-650
16 Mo 3	275	270	³⁾ 260	³⁾ 440-590
13 CrMo 4-5	300	³⁾ 295		³⁾ 450-600
10 CrMo 9-10	310	300	³⁾ 290	³⁾ 480-630
11 CrMo 9-10	min. 310			520-670
*EN 10028-3*
P275N, NH, NL1, NL2	275	275	⁴⁾ 265	^4)* 390-510
P355N, NH, NL1, NL2	355	355	⁴⁾ 345	^4)* 490-630
P460N, NH, NL1, NL2	460	450	⁴⁾ 440	^4)* 570-720
*EN 10028-4*
11 MnNi 5-3		⁵⁾ 285	^5)* 275	420-530
13 MnNi 6-3		⁵⁾ 355	^5)* 345	490-610
15 MnNi 6, 12 Ni 14		⁵⁾ 355	^5)* 345	490-640
12 Ni 19		⁵⁾ 390	^5)* 380	530-710
X8 Ni9 HT 640		⁵⁾ 490	^5)* 480	640-840
X8 Ni9 HT 680		⁵⁾ 585	^5)* 575	680-820
X7 Ni 9		⁵⁾ 585	^5)* 575	680-820
*EN 10028-5*
P355M, ML1, ML2	355	355	⁶⁾ 345	450-610
P420M, ML1, ML2	420	400	⁶⁾ 390	500-660
P460M, ML1, ML2	460	440	⁶⁾ 430	530-720
*EN 10028-6*
P355Q, QH, QL1, QL2	⁷⁾ 355	^7)* 335	^7)** 315	^7)*** 490-630
P460Q, QH, QL1, QL2	⁷⁾ 460	^7)* 440	^7)** 400	^7)*** 500-720
P500Q, QH, QL1. QL2	⁷⁾ 500	^7)* 480	^7)** 440	^7)*** 590-770
P690Q, QH, QL1, QL2	⁷⁾ 690	^7)* 670	^7)** 630	^7)*** 770-940
PRESSURE VESSELS, LOW TEMPERATURE SERVICE
*EN 10207*
P235S	235	225	215	360-480
P265S	265	255	245	410-530
P275S	275	265	255	390-510

¹⁾ For t£50mm.

^1)* For 50<t£100mm

^1)** For 100<t£150mm. For t>150mm, see EN 10137-2.

^1)*** For t£100mm. For t>100mm, see EN 10137-2.

²⁾ For t£50mm.

^2)* For 50<t£70mm.

³⁾ For plates thicker than 60mm, see EN 10028-2:1992.

⁴⁾ For plates thicker than 50mm, see EN 10028-3:1992.

^4)*For plates thicker than 70mm, see EN 10028-3:1992.

⁵⁾ For t£30mm.

^5)* For 30<t£50mm

⁶⁾ Maximum thickness 63mm.

⁷⁾ For t£50mm

^7)* For 50<t£100mm

^7)** For 100<t<150mm

^7)*** For t£100mm. For 100<t£150mm, see EN 10028-6.

* For LR plates the difference between the A, B, D, E, F grades are the impact tests. They are made at the following temperatures:

A grade +20 °C B/AH grade 0 °C

D/DH grade -20 °C E/EH grade -40 °C

FH grade -60 °C